Black & Decker ST4500 3.5 amp 12-Inch Electric Trimmer/Edger
Black & Decker ST4500 3.5 amp 12-Inch Electric Trimmer/Edger
You Save : $22.92 (38%)
Product Description
Amazon.com Product Description
Excellent for each post-mowing upkeep edging and trimming grass in difficult-to-reach locations mowers can't access, this electric two-in-one particular tool from Black Decker assists preserve your yard seeking its preferred. Powered by a 35 Amp motor that revolves at a speed of ten,000 RPM, the ST4500 cuts a 12-inch path quickly and readily. For rapid transitions from trimming to edging, the "Groom 'n' Edge" head spins 180 degrees, while a flip-down edge guide gets close to tight regions about sidewalks, driveways, or pavement paths. There's also a handy cord retention method to guard against unintended unplugging of the tool though you happen to be working, and a built-in assist handle to decrease wrist fatigue.
Incorporates 3.five Amp 12-in Straight Shaft Electric String Trimmer / Edger - ST4500
See all Item Description
You Save : $22.92 (38%)
Product Functions
- Ideal for each post-mowing maintenance edging and trimming grass in difficult-to-reach places
- "Groom 'n' Edge" head spins 180 degrees to transition to edging operate
- 35 Amp motor rotates at a speed of 10,000 RPM 12-inch cutting path
- Weighs four. pounds 2-year warranty
- Cord retention program guards against unintended unplugging when you are operating
Customer Critiques
I purchased this for about $40 thinking I'd gotten a great deal on a weed eater (hadn't looked about as well tricky)... put to use this twice then the spool housing wore out immediately. Does not appear like the replacement spool has the element that wore out which is highly unfortunate because its construction appears to be a hideous oversight, as least in my opinion.
Here's why: The spindle mechanism which causes the spool to spin and thus cut weeds is a small metal die with pretty shallow metal grooves. The spool housing connects to this and has a tiny die opening with shallow plastic grooves. When brand new these fit with each other snugly and make a tight fit for the spool to spin. What takes place though in application is if there is any moderately dense vegetation and the spool does not get fully cost-free, it will slow down but the die will still spin inside the plastic housing whereby causing the spool container to strip out on the inside. Soon, the spool housing just fell off and will not reconnect to the die.. it just falls off as soon as you start off it up. I was hoping I could obtain a replacement for this but it seems as although the replacement spool just contains the wire/ wire holder. The portion that stripped out was the element that connects to this which is not, ridiculously, component of the replacement portion. Two uses and my weed whacker is now whacked.
A classic example of a disposable society which we desperately want to get away from.
I concur with the other critical reviews here. This item is defective by style.
The symptom is excessive line breakage which results in the finish trapped inside the feed spool.
The predicament is undue wear at the metal grommet via which the line feeds from the spool. Immediately after some use, the finish of the cord wears down 1/2 to 1", but the fatal flaw is that simultaneously the cord at the feed grommet has worn via 1/two the diameter of the cord, drastically weakening the cord strength and causing eventual breakage near the spool exit point. The cord then retreats into the spool housing, disabling the bump feed feature. As yet another reviewer stated, it then calls for disassembly to repair.
A pox on anybody who sells this piece of junk. Ironic that it is such a poor product that one particular huge box store (HD) does not even carry it.
You Save : $22.92 (38%)
Related Product
